A SAMPLE OF REFEREED PUBLICATIONS

2001-2005 (more recent publications are listed elsewhere) 

                                         



 

			



                     
HOJJATIE, B., and COFFIN, D.W,
"Determination of  Sheet Topography using Shadow Moiré 
Method",
 TAPPI Journal, vol 4 (5), 7-10 (2005).






						





AHRENS, F., PATTERSON, T., MUELLER, S., and HOJJATIE, B.,

"Investigation of Paper Dryer Picking, Web Transfer and Quality 
issues using a New Web Adhesion and Drying Simulator", 
 Brazilian J. Chem. Egg’s, vol 22 (02), 217-225, April-June, (2005). 
						




						





AHRENS, F., HOJJATIE, B., and COFFIN, D., "Influence of 
Drying Variables in Development of Cockle: An Experimental Study", Drying Technology, In Press (2005).
			




					
							


 LISEN, J., HOJJATIE, B., COFFIN, D., LAVRYKOV, S., RAMARAO, B. and BECKHAM, H., "Through-Plane Diffusion of Moisture in Paper Detected by Magnetic Resonance Imaging", Industrial and Engineering Chem. Res. 41(25), 6555-6565 (2002).
					




						





HOJJATIE, B., ABEDI, J., and COFFIN, D.  , "Qualitative Determination 
of In-Plane Moisture Distribution in Paper",  Tappi Journal , vol 84 (5), 71 (2001).


						




						




 HABAGER, C., COFFIN, D., and HOJJATIE, B.,  "Moisture Accelerated 
Creep of Polymeric Fibers",
Journal of Polymer Science, Part B polymer Physics, 39:2048-2062 (2001).
						




						




LEISEN, J., HOJJATIE, B., COFFIN, D.W., and BECKHAM, H.W., "In-Plane Moisture
 Transport in paper Detected by 	Magnetic Resonance Imaging",
  Drying Technology  , 19(1), 199-206 (2001). 
						

          
   
						


 

1991-2000

                                         











BLOOM, F., HOJJATIE, B., and ORLOFF, D.I. "Modeling and Analysis of Impulse drying Press Roll, Int. J
	Computer Modeling
 ",  Int. J
	Computer Modeling, (29), 59-88 (1999).

						




						




 DeHOFF, P. H., ANUSAVICE, K.J., and HOJJATIE, B.,
"Thermal Incompatibility Analysis of Metal-Ceramic Systems 
based on Flexural Displacement Data ",
  J Biomed Mater Res, 41, 614-623 (1998). 
	
		









ORLOFF, D.I.; HOJJATIE, B.; and BLOOM, F., 
"Heat Transfer in a Crown Compensated Press Roll"
,  Tribology  Transaction, 39 (4), 745-756 (1996). 
						




						




 HOJJATIE, B.; BLOOM, F.; and ORLOFF, D.I.,
"Analysis of Lubrication for Controlled-Crown Press Rolls: A 
Parametric Study ",
  TAPPI Journal, 79(9), 164-171 (1996). 
	
		













SOKOLOWSKI, T.M.; HOJJATIE, B.; NEMETH, M.N.; and ANUSAVICE, K.J., 
"Stress and Reliability Analysis of Metal-Ceramic Dental Crowns
Roll", 
 NASA Technical Mem., 7178 (10), 1-18, (1996). 
						




						











BLOOM, F.; HOJJATIE, B.; and ORLOFF, D.I.,
"Analysis of a Crown-Compensated Impulse Drying Press Roll",
Tappi J., 79 (9), 164-173  (1996).
			



















HOJJATIE, B., and ORLOFF, D.I.;

"Analysis of a Crown-Compensated Press used in Papermaking",
 
Fluid Machinery, edited by U.S. Rohatgi, A. Ogut, and H. Hayami, FED-vol 222, (1995). 
						




						




                     
ANUSAVICE, K.J.; HOJJATIE, B.; and CHANG, T.C.,
"Effect of Grinding and Etching on Strength of Ion-Exchanged 
Porcelain",

J Dent Res, 73 (8), 1444-1449, (1994).
			





						





HOJJATIE, B. and ANUSAVICE, K.J.,
"Tempering of Ceramics from Various Initial 
Temperatures",

J Dent Res, 72(3), 566-571 (1993). 
			



















ANUSAVICE, K.J.; and HOJJATIE, B.

"Tensile Stress in Glass-Ceramic Crowns:  Effect of Flaws 
and Cement Voids", 
 , Int J Prosth 4 (5), 3351-358 (1992). 
						




						




                     
ANUSAVICE, K.J. AND HOJJATIE, B.,
"Effect of Thermal Tempering on Strength 
and Crack Propagation Behavior of Feldspathic Porcelains",

J Dent Res 70 (6), 1009-1013 (1991).






						


 

1986-1990

                                         













HOJJATIE, B. and ANUSAVICE, K.J.,
"Three Dimensional Finite Element Analysis of Castable Ceramic 
Crown",

J Biomech, 23 (11), 1157-1166 (1990).
			


















ANUSAVICE, K.J.; DEHOFF, P.H.; HOJJATIE, B.; AND GRAY, A.,

"Influence of Tempering and 
Contraction Mismatch on Crack Growth in Ceramic Surfaces",
  , J Dent Res 68 (7), 182-1187 (1989). 
						




						




                     
ANUSAVICE, K.J. and HOJJATIE, B.,
"Influence of Prepared Tooth Height on Stress 
Distribution in Ceramic Crowns",
J Dent Res 67 (11), 1371-1375 (1989).







						





HOFFMAN, R.G.; ABELLA, G.S.; FRIEDL, S.E.; HOJJATIE, B.; and BARBEAU, G.R
"Dosimetry of Plaque Ablation using Thermal and Thermal-Optical 
Probe Systems",

SPIE vol. 1067, Optical Fibers in Medicine IV, 120-126, (1989).
			



















COFFEY, J.P.; ANUSAVICE, K.J.; DEHOFFF, P.H.; LEE, R.B.; and HOJJATIE, B.,

"Influence of Contraction Mismatch 
and Cooling Rate on Flexural Failure of PFM Systems",
  J Dent Res 67 (1), 61-65 (1988). 
						




						




                     
ANUSAVICE, K.J. and HOJJATIE, B.,
"Influence of Icisal Length of Ceramic and Loading 
Orientation on Stress Distribution in Ceramic Crowns",
J. Dent Res 67 (11),  1371-1375 (1988).






						





BEATTY, R.G.: VERTUCCI, F.J.: and HOJJATIE, B.,
",Thermo-mechanical Compaction of Gutta-Percha:  Effect of 
Speed and Duration",
, Int Endo J, Vol. 21 (6), 367-375 (1988).
			



















JAVID, N.S.; COLAIZZI, F.A.; HOJJATIE, B.; and CICILE, G.M.,
"Influence of Materials in Reproducibility of Centric 
Relation Records", 
 , Int J Prosth1 (3), 286-290 (1988). 
						




						




                     
ANUSAVICE, K.J. and HOJJATIE, B
"Stress Distribution in Metal-Ceramic Crowns 
with Facial Porcelain Margin",
J Dent Res, 66 (9), 1493-1498 (1987).







						





ANUSAVICE, K.J.; HOJJATIE, B.; and DEHOFF
"Influence of Metal Thickness on Stress Distribution 
in Metal-Ceramic Crowns"
, J Dent Res, 65 (9), 1173-1178 (1986).